RIARTE Principal
    • español
    • English
  • español 
    • español
    • English
  • Login
Ver ítem 
  •   RIARTE Principal
  • 2. INVESTIGACIÓN CIENTÍFICA
  • Artículos en revistas científicas
  • Ver ítem
  •   RIARTE Principal
  • 2. INVESTIGACIÓN CIENTÍFICA
  • Artículos en revistas científicas
  • Ver ítem
JavaScript is disabled for your browser. Some features of this site may not work without it.

Optimization of multi-stage thickening of biomass in a demonstrative full-scale microalgae-based wastewater treatment system

Identificadores
URI: http://hdl.handle.net/20.500.12251/3036
ISSN: 1383-5866
DOI: 10.1016/j.seppur.2021.119830
Compartir
Estadísticas
Ver Estadísticas de uso
Metadatos
Mostrar el registro completo del ítem
Autor
Ortiz Ruiz, Antonio; García, Joan; Uggetti, Enrica; Díez Montero, Rubén
Fecha
2022
Materia/s

Microalgas

Biomasa

Ensayos (propiedades o materiales)

Materia/s Unesco

2417.05 Biología Marina

2417.13 Ecología Vegetal

2510.04 Botánica Marina

2510.91 Recursos Renovables

Resumen

This study gathers the results of the operation and optimization of the thickening of microalgal biomass produced at demonstrative scale in photobioreactors fed with agricultural runoff and domestic wastewater. The optimization was conducted during two months. The system consisted in two gravity thickeners connected in series in a multi-stage approach. The objective of thickening was to concentrate the microalgae grown in photobioreactors (total solids (TS) concentration of 0.1-1 g/L) into a biomass with 20 g/L of TS, which was considered optimal for the subsequent anaerobic digestion process. First, the utilization of one single thickener alone allowed to achieve a concentration factor (CF) of 1.9 and recovery efficiency (RE) of 28%. However, the final concentration of TS in the thickened biomass (6.4 g/L) was still much lower than the target concentration. The installation of the second thickener connected in series with the first one significantly improved the overall performance. Indeed, a TS concentration of 26.5 g/L was finally achieved, with an overall CF of 3.6. The results of the study suggest that the multi-stage thickening process is a suitable strategy and it is highly advisable to achieve a successful microalgal biomass thickening at full-scale. In addition, other three points have been identified as key factors to be taken into account for biomass tickening: proper adjustment of the purge flowrate, coordination between purges times and volumes in the different stages, and proper adjustment of the operation of the scrapers.

This study gathers the results of the operation and optimization of the thickening of microalgal biomass produced at demonstrative scale in photobioreactors fed with agricultural runoff and domestic wastewater. The optimization was conducted during two months. The system consisted in two gravity thickeners connected in series in a multi-stage approach. The objective of thickening was to concentrate the microalgae grown in photobioreactors (total solids (TS) concentration of 0.1-1 g/L) into a biomass with 20 g/L of TS, which was considered optimal for the subsequent anaerobic digestion process. First, the utilization of one single thickener alone allowed to achieve a concentration factor (CF) of 1.9 and recovery efficiency (RE) of 28%. However, the final concentration of TS in the thickened biomass (6.4 g/L) was still much lower than the target concentration. The installation of the second thickener connected in series with the first one significantly improved the overall performance. Indeed, a TS concentration of 26.5 g/L was finally achieved, with an overall CF of 3.6. The results of the study suggest that the multi-stage thickening process is a suitable strategy and it is highly advisable to achieve a successful microalgal biomass thickening at full-scale. In addition, other three points have been identified as key factors to be taken into account for biomass tickening: proper adjustment of the purge flowrate, coordination between purges times and volumes in the different stages, and proper adjustment of the operation of the scrapers.

Colecciones
  • Artículos en revistas científicas

Listar

Todo RIARTEComunidades y ColeccionesAutoresTítulosMateriasMaterias UnescoTipos de documentosEsta colecciónAutoresTítulosMateriasMaterias UnescoTipos de documentos

Mi cuenta

AccederRegistro

Estadísticas

Ver Estadísticas de uso

Ayuda

Sobre RIARTEPreguntas frecuentesLocalizar informaciónPolíticasPolítica de Protección de Datos

Políticas Editoriales OA

Logo SHERPA/RoMEOLogo Dulcinea

Difusión de contenido

Logo RecolectaLogo Hispana

Copyright © Consejo General de la Arquitectura Técnica 2018 | Aviso Legal | Política de Protección de Datos

Facebook
Twitter
Contacto Sugerencias