An adjusted analytical solution for thermal design in artificial ground freezing

Abstract

Artificial ground freezing is a widely used, reliable method for excavation in water-bearing ground. The questions posed in the thermal design of ground freezing projects require solving moving boundary (Stefan) problems. Approximate analytical solutions, such as the ones by Ständer1 and Sanger and Sayles,2 have been developed for thermal engineering design and are used by practitioners across the industry. For instance, Sanger & Sayles' solution is widely used for the single-freeze-pipe problem, but it has proven to be of limited accuracy.3 In the present paper, an adjustment to this formula is proposed based on the re-evaluation of their empirical assumption that the ratio between the temperature penetration depth and the phase-change radius equals a constant value of 3 regardless the conditions. A sensitivity study is performed using a verified numerical model as a benchmark to study several problems with different initial and boundary conditions (initial, phase change and freeze pipe temperatures) and thermal properties of the ground (water content, thermal conductivity and heat capacity). This is done for the freezing times of 10 and 365 days, in order to consider the potential change of the ratio with the freezing time. In this way, a calibrated formula is proposed to find appropriate values of this ratio and a suitable adjustment to Sanger & Sayles' solution is determined. Adjusting Sanger & Sayles’ solution in this manner, a significantly higher and more consistent accuracy is achieved for different boundary and initial conditions. This accuracy improvement was checked for real conditions from an engineering project, which shows that the adjustment can be useful for thermal problems in engineering design of ground freezing. © 2022 The Authors