Mostrar el registro sencillo del ítem

dc.contributor.authorValcuende, M.
dc.contributor.authorBenito Saorín, Francisco Javier
dc.contributor.authorParra, C.
dc.contributor.authorMiñano, I.
dc.date.accessioned2026-07-01T07:50:57Z
dc.date.available2026-07-01T07:50:57Z
dc.date.issued2015
dc.identifier.citationValcuende, M., Benito Saorín, F. J., Parra, C., y Miñano. (2015). Shrinkage of self-compacting concrete made with blast furnace slag as fine aggregate. Construction and Building Materials, 76, 1-9. https://doi.org/10.1016/j.conbuildmat.2014.11.029es
dc.identifier.issn0950-0618
dc.identifier.urihttp://hdl.handle.net/20.500.12251/5152
dc.description.abstractThe aim of this experimental work was to study shrinkage evolution with age in self-compacting concretes (SCC) in which part of the fine aggregate was replaced by granulated blast furnace slag (GBFS) as sand. Seven types of SCC were made with a w/c ratio of 0.55 and different slag contents. The results show that replacing sand by GBFS gives rise to mixes with higher pore volume but with slightly finer porous structure (smaller median pore and threshold diameters). At early ages slag SCCs have similar compressive strength to that of the reference concrete, although in the long term their strength increases as a result of slag reactivity. We also observed that the higher the slag content, the higher were both autogenous and drying shrinkage and consequently also total shrinkage. In comparison with the reference concrete, the increase in total shrinkage was found to be of the order of 4% and 44% when 10% and 60%, respectively, of the sand was replaced by slag. © 2014 Elsevier Ltd. All rights reserved.es
dc.language.isoenges
dc.publisherElsevier Ltdes
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.titleShrinkage of self-compacting concrete made with blast furnace slag as fine aggregatees
dc.typearticle
dc.identifier.doi10.1016/j.conbuildmat.2014.11.029
dc.identifier.urlhttps://www.scopus.com/results/results.uri?s=AU-ID%2856458956900%29&sot=aut&sdt=a&origin=AuthorProfile&src=s&sort=plf-f&limit=200&sessionSearchId=953feb5c51676cd7dac7ee4aa6efe46e
dc.journal.titleConstruction and Building Materialses
dc.page.initial1es
dc.page.final9es
dc.rights.accessRightsopenAccesses
dc.subject.keywordHormigónes
dc.subject.keywordEscoria siderúrgicaes
dc.subject.keywordRetracción - Ensayoses
dc.subject.keywordPropiedades mecánicases
dc.subject.unesco3305.05 Tecnología del Hormigónes
dc.subject.unesco3312.08 Propiedades de Los Materialeses
dc.volume.number76


Ficheros en el ítem

FicherosTamañoFormatoVer

No hay ficheros asociados a este ítem.

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 Internacional