Mostrar el registro sencillo del ítem

dc.contributor.authorHernández Olivares, Francisco
dc.contributor.authorMayor Lobo, Pablo Luis
dc.date.accessioned2026-07-01T08:01:01Z
dc.date.available2026-07-01T08:01:01Z
dc.date.issued2011
dc.identifier.citationHernández Olivares, F. y Mayor Lobo, P. L. (2011). Experimental assessment of commercial one-coat renders for buildings facades. Construction and Building Materials, 25(1), 156-162. https://doi.org/10.1016/j.conbuildmat.2010.06.044es
dc.identifier.issn0950-0618
dc.identifier.urihttp://hdl.handle.net/20.500.12251/5507
dc.description.abstractThis paper presents an experimental study on a selection of commercial one-coat dry renders by means of laboratory tests, focused to analyze early age shrinkage strain and microcracking, on Kraai tests on fresh mixtures and hardened render specimens. Thermogravimetry (TG) weight loss measures were accomplished on hardened renders to ascertain their basic composition, and to correlate the water/cement ratio prescribed by the manufacturer, with the water just added to the mortar on site. It was obtained that the basic composition of modern dry renders is quite similar to that used to design ancient waterproofing mortars. A two-stage Arrhenius-type relationship was obtained from TG weight loss tests, universal for all the tested one-coat tested and in close correspondence with the enthalpy involved in the lime hydration/dehydration cycle. The long-term storage capacity of CO(2) from the atmosphere, in the lime contained in one-coat renders of the exterior facades of buildings, is shown. (C) 2010 Elsevier Ltd. All rights reserved.es
dc.language.isoenges
dc.publisherELSEVIER SCI LTDes
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.titleExperimental assessment of commercial one-coat renders for buildings facadeses
dc.typearticle
dc.identifier.doi10.1016/j.conbuildmat.2010.06.044
dc.issue.number1es
dc.journal.titleConstruction and Building Materialses
dc.page.initial156es
dc.page.final162es
dc.rights.accessRightsopenAccesses
dc.subject.keywordFachadases
dc.subject.keywordPorosidades
dc.subject.unesco1203.09 Diseño Con Ayuda del Ordenadores
dc.subject.unesco3305 Tecnología de la Construcciónes
dc.subject.unesco3305.37 Planificación Urbanaes
dc.subject.unesco3312 Tecnología de Materialeses
dc.subject.unesco3312.08 Propiedades de Los Materialeses
dc.subject.unesco3312.09 Resistencia de Materialeses
dc.subject.unesco3305.06 Ingeniería Civiles
dc.volume.number25


Ficheros en el ítem

FicherosTamañoFormatoVer

No hay ficheros asociados a este ítem.

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem