Lightweight outer panel of ventilated fagade of building, is manufactured from fiber-reinforced high-resistance concrete, and included with anchoring unit for anchoring to load-bearing structure

Abstract

The outer panels (1,1a) include an anchoring unit for anchoring to a load-bearing structure (2). The outer panel is manufactured from steel or plastic fiber-reinforced high-resistance concrete. The thickness of the panel is approximately 2 cm. The surface of panel is included with openings (3) to allow the passage of light. The diameter of steel fibers is 0.2 mm, and traction resistance of steel fiber is 2 MPa. USE - Lightweight outer panel of ventilated fagade of building. ADVANTAGE - Greater flexotraction resistance, greater impact resistance, and minimum thickness can be ensured. Since panel is made of fiber-reinforced high-resistance concrete, improved deformability and high tolerance absorption are ensured when compared to ceramic material in terms of transport, manageability and installation. Small number of anchoring with greater separation is provided, and large-sized work piece is obtained. Better behavior between the linear anchoring is ensured than in case of ceramics. The openings can be made at any point of the outer panel. External appearance of the panel can be improved. Panel is susceptible of receiving multiple panel texturization possibilities, including paints, denaturation of mortar to reveal the aggregates, incrusting of aggregates, superficial monolayer, lining with other workpieces such as stone or ceramic, etc. Panel is susceptible of presenting multiple three-dimensional geometric shapes such as projection shape, semi-spherical shapes, etc. DESCRIPTION Of DRAWING(S) - The drawing shows the elevational view of the lightweight outer panel.Outer panels (1,1a)Load-bearing structure (2)Opening (3)Window (4)