Experimental Comparison of Passive Heating/Cooling Space in Lightweight Buildings with Potential Application in Mining Camps
Identifiers
Share
Statistics
View Usage StatisticsMetadata
Show full item recordAuthor
Date
2020-06Subject/s
Unesco Subject/s
3305.90 Transmisión de Calor en la Edificación
3308.01 Control de la Contaminación Atmosférica
3322.05 Fuentes no Convencionales de Energía
Abstract
The total energy consumption in a house in Chile includes 30% of heating expenses, increasing to 60% in the winter period. The current energy source are fossil fuels, which can be replaced by the sun, with an efficient implementation of the use of PCM for passive cooling/heating space from solar radiation, benefiting the environment. In the north of Chile there is a solar radiation index of approximately 2750 kWh•m-2, low cloudiness and low precipitation rates, indicating an important source of energy and great opportunity for improvement in the use and management of energy resources. Moreover, mining camps present in large numbers in the northern zone require a lot of energy to cool and heat the space. This research shows the thermal behavior in summer and winter of two lightweight constructions, similar to the type used in mining camps, with dimensions of 2.5 2.5 2.5 m at pilot scale installed at the University of Antofagasta, Chile. One of these modules contains PCM on the inside of the walls and ceiling, while the other does not, to analyze the effect of PCM by comparison. The results of this work show that in winter (August) the application of PCM favors the permanence within the thermal comfort zone, with a difference of 5C. In summer there is an opposite effect (January), experiencing a higher temperature increase inside the container with PCM, with a difference of 4C. According to the constructive characteristics, properties and quantity of PCM used, and the effect of solar radiation on the structure and environmental conditions, there are benefits in energy saving and efficiency in the winter period, while summer shows results that enhance the study and analysis of the applied technology to solve the thermal behavior shown in this season. © 2020 Published under licence by IOP Publishing Ltd.
The total energy consumption in a house in Chile includes 30% of heating expenses, increasing to 60% in the winter period. The current energy source are fossil fuels, which can be replaced by the sun, with an efficient implementation of the use of PCM for passive cooling/heating space from solar radiation, benefiting the environment. In the north of Chile there is a solar radiation index of approximately 2750 kWh•m-2, low cloudiness and low precipitation rates, indicating an important source of energy and great opportunity for improvement in the use and management of energy resources. Moreover, mining camps present in large numbers in the northern zone require a lot of energy to cool and heat the space. This research shows the thermal behavior in summer and winter of two lightweight constructions, similar to the type used in mining camps, with dimensions of 2.5 2.5 2.5 m at pilot scale installed at the University of Antofagasta, Chile. One of these modules contains PCM on the inside of the walls and ceiling, while the other does not, to analyze the effect of PCM by comparison. The results of this work show that in winter (August) the application of PCM favors the permanence within the thermal comfort zone, with a difference of 5C. In summer there is an opposite effect (January), experiencing a higher temperature increase inside the container with PCM, with a difference of 4C. According to the constructive characteristics, properties and quantity of PCM used, and the effect of solar radiation on the structure and environmental conditions, there are benefits in energy saving and efficiency in the winter period, while summer shows results that enhance the study and analysis of the applied technology to solve the thermal behavior shown in this season. © 2020 Published under licence by IOP Publishing Ltd.
Collections
