Acoustic emission as a reliable technique for filiform corrosion monitoring on coated AA7075-T6: Tailored data processing
Identificadores
Compartir
Estadísticas
Ver Estadísticas de usoMetadatos
Mostrar el registro completo del ítemAutor
Fecha
2023Materia/s
Materia/s Unesco
3305 Tecnología de la Construcción
3305.32 Ingeniería de Estructuras
Resumen
Acoustic emission (AE) was used for in-situ filiform corrosion (FFC) monitoring on coated AA77075-T6. The analysis of AE data using DBSCAN as clustering algorithm (validated by Bhattacharyya Coefficients´ evaluation) has revealed the presence of three clusters (out of four) related to phenomena involved in the FFC mechanism: metal-coating interface delamination due to opening (tensile), sliding (shear) and mixed mode enclosing both previous ones. The peak frequency was found to be the most relevant descriptor for clustering by using Random Forest classifier, and the correlation with the dominant frequencies range was validated obtaining the Power Spectrum Density of the AE signals. © 2023 The Authors
Acoustic emission (AE) was used for in-situ filiform corrosion (FFC) monitoring on coated AA77075-T6. The analysis of AE data using DBSCAN as clustering algorithm (validated by Bhattacharyya Coefficients´ evaluation) has revealed the presence of three clusters (out of four) related to phenomena involved in the FFC mechanism: metal-coating interface delamination due to opening (tensile), sliding (shear) and mixed mode enclosing both previous ones. The peak frequency was found to be the most relevant descriptor for clustering by using Random Forest classifier, and the correlation with the dominant frequencies range was validated obtaining the Power Spectrum Density of the AE signals. © 2023 The Authors
Colecciones
