Show simple item record

Preparing lightweight plaster board for building interior partition, involves crushing recycled polyurethane foam particles, and adding crushed polyurethane foam with gypsum to obtain homogeneous powder mixture

dc.contributor.authorGutiérrez González, Sara
dc.contributor.authorCalderón Carpintero, Verónica
dc.contributor.authorRodríguez Sáiz, Ángel
dc.contributor.authorGadea Sáinz, Jesús
dc.contributor.authorJunco Petrement, Carlos
dc.contributor.authorGarabito López, Javier
dc.date.accessioned2026-07-01T08:05:08Z
dc.date.available2026-07-01T08:05:08Z
dc.date.issued2014
dc.identifier.citationGutiérrez González, S., Calderón Carpintero, V., Rodríguez Sáiz, Á., Gadea Sáinz, J., Junco Petrement, C., y Garabito López, J. (2014). Preparing lightweight plaster board for building interior partition, involves crushing recycled polyurethane foam particles, and adding crushed polyurethane foam with gypsum to obtain homogeneous powder mixture [Patente].es
dc.identifier.urihttp://hdl.handle.net/20.500.12251/6618
dc.description.abstractPreparing lightweight plaster board involves crushing recycled polyurethane foam particles to obtain the particle diameter 0-0.5 millimeter and then adding the crushed polyurethane foam with gypsum to obtain homogeneous powder mixture. The obtained mixture is kneaded with water and then the kneaded material is poured into a frame mold. The obtained material is heated with the paperboard and resin in an oven at 40 plus minus 2 degrees C and then the mold plate is removed after curing. USE - Method for preparing lightweight plaster board for building interior partition (claimed). ADVANTAGE - The method enables to prepare lightweight plaster board that is eco-friendly because of its good biodegradability.es
dc.language.isoenges
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.titlePreparing lightweight plaster board for building interior partition, involves crushing recycled polyurethane foam particles, and adding crushed polyurethane foam with gypsum to obtain homogeneous powder mixturees
dc.typepatent
dc.rights.accessRightsopenAccesses
dc.subject.keywordYesoes
dc.subject.keywordReciclaje - Construcciónes
dc.subject.keywordParticiones interioreses
dc.subject.keywordResiduos poliméricoses
dc.subject.keywordPoliuretanoes
dc.subject.unesco3312 Tecnología de Materialeses
dc.subject.unesco3305 Tecnología de la Construcciónes
dc.subject.unesco3313.04 Material de Construcciónes
dc.subject.unesco3308.07 Eliminación de Residuoses
dc.subject.unesco3305.20 Construcciones Ligerases
dc.subject.unesco2304 Química Macromoleculares
dc.subject.unesco5312.03 Construcciónes
dc.subject.unesco2206.10 Polímeroses
dc.subject.unesco3312.10 Plásticoses
dc.subject.unesco3307.17 Dispositivos Termoeléctricoses


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 Internacional